Experimental Physics and Industrial Control System
Hi all,
I'm using some devices via a simple CAN device support for SocketCAN without
support for acknowledged writes etc. The IOC instead periodically asks the
devices for an update and they reply with a CAN packet containing the device
status.
Now my question is very simple: What is the EPICS way of implementing a
timeout which raises an alarm if a device did not answer for a given time? Is
it possible to configure this alarm condition in the database?
Thanks a lot in advance.
Martin
--
Dipl. Phys. Martin Konrad
Technische Universität Darmstadt
Institut für Kernphysik
Schlossgartenstr. 9
64289 Darmstadt
Tel: 06151-16-5121
Fax: 06151-16-4321
- Replies:
- RE: Alarm if no status update received for a given time Dalesio, Leo
- Navigate by Date:
- Prev:
RTEMS Survey Eric Norum
- Next:
Failed to create single DLLs on Windows Wang Xiaoqiang
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RTEMS Survey Eric Norum
- Next:
RE: Alarm if no status update received for a given time Dalesio, Leo
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024