EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: StreamDevice
From: Pierrick Hanlet <[email protected]>
To: "[email protected]" <[email protected]>
Date: Thu, 10 Sep 2009 16:26:41 -0500
Hi,
I'm attempting to build StreamDevice.  The tar file does not have a configure
directory; nor does the previous version.  The web page claims that one can
simply untar the file, move into the directory and type "make".  This is not
true as far as I can tell.  Is there something I'm missing?
Thanks,
Pierrick

-----------------------------------------------------------------------------------------
Pierrick Hanlet
Fermilab, P.O. Box 500, M.S. 122
Batavia, IL 60510
[email protected]
(630)840-5555/8871/6039         office/lab/fax 
http://www-d0.fnal.gov/~hanlet 

"Whether you think you can or think you can't, either way, you are correct" -- Henry Ford


Replies:
Re: StreamDevice Ron Sluiter

Navigate by Date:
Prev: RE: Recommendation for digitizer? Szalata, Zenon M.
Next: protocol files for CAEN Sy127/Sy527 Pierrick Hanlet
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: "buffer over-write" problem with StringIn record Ralph Lange
Next: Re: StreamDevice Ron Sluiter
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  <20092010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024