Experimental Physics and Industrial Control System
Hi,
At Jefferson Lab, we have been using the dump the output of the "dbl"
command to a file in the st.cmd files method to initialize the CA
nameserver. Recently, however, it was requested to make sure the dbl
command was before the iocInit. But in doing so I find the
the dbl command does not complete its dump to the redirected file but is
interrupted in the process and dumps some of the file to
standard out. (I can see it in the iocsh.) The following line is in all
our ioc st.cmd files:
< O_prod/epics/startup.epicsgo
in epics 3.13 startup.epicsgo, always worked:
# Start EPICS
cd HOME
<../getBoot.vx
dbl > signal.list
symLkupPgSz=0
lkup "_loaded" > app.list
symLkupPgSz=22
iocInit "resource.def"
in epics 3.14.8.2 startup.epicsgo, DOES NOT work:
# Start EPICS
<resource.def
dbl > signal.list
symLkupPgSz=0
lkup "_loaded" > app.list
symLkupPgSz=22
iocInit
in epics 3.14.8.2 startup.epicsgo, works:
# Start EPICS
<resource.def
symLkupPgSz=0
lkup "_loaded" > app.list
symLkupPgSz=22
iocInit
dbl > signal.list
Is there an obvious explanation for this behavior? I'm running epics
3.14.8.2, vxWorks 5.5 on mv2700 and mv5100.
Thanks in advance for any insight.
Sue Witherspoon
Accelerator Software Controls
Jefferson Lab
757-269-7579
- Replies:
- Spring Meeting 2010? Mathias Steiner
- Navigate by Date:
- Prev:
Re: Getting String Form of Enums Kasemir, Kay
- Next:
makeBaseApp -t ioc missing Makefile Patrick Thomas
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Getting String Form of Enums Kasemir, Kay
- Next:
Spring Meeting 2010? Mathias Steiner
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024