Experimental Physics and Industrial Control System
Hi Bruce,
I do file I/O from GenSub process functions without any problem. We are
using VxWorks, not RTEMs, although I am not sure if or why that would
make a difference.
Regards,
Erik
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bruce Hill
Sent: Friday, October 30, 2009 1:42 PM
To: Techtalk
Subject: File I/O from genSub Process function
I have a genSub I've setup to run test code on my IOC, and I'm getting
errors when I try to read the test set data files. This is an RTEMS
4.7.1 based
IOC accessing an NFS mounted filesystem. I'm able to read the same
files from a genSub Init function, but not from the Process function.
I can also read these files if I initiate the test from the Cexp shell
on the RTEMS console.
Is there something about how the Process functions are called that would
preclude file I/O?
Thanks!
- Bruce Hill
--
Bruce Hill
Member Technical Staff
SLAC National Accelerator Lab
2575 Sand Hill Road M/S 94
Menlo Park, CA 94025
- References:
- File I/O from genSub Process function Bruce Hill
- Navigate by Date:
- Prev:
File I/O from genSub Process function Bruce Hill
- Next:
Re: File I/O from genSub Process function Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
File I/O from genSub Process function Bruce Hill
- Next:
Re: File I/O from genSub Process function Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024