| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Prosilica GE1350 |
| From: | "Mark Rivers" <[email protected]> |
| To: | "Steve Kinder" <[email protected]>, "epics" <[email protected]> |
| Date: | Fri, 4 Dec 2009 09:45:22 -0600 |
|
Hi Steve, areaDetector should work with all Prosilica GigE cameras. I
have used the GC1360, which is very similar to the GE1350. Have you already
purchased the camera? If not, the GC series are newer, cheaper and faster. Will you run it under Linux or Windows? If Linux then there
is a patch needed for EPICS base 3.14.10. It works fine with 3.14.11. If you
use the pre-built version of areaDetector this is not an issue, since it was
built with the necessary patch. Mark From:
[email protected] [mailto:[email protected]] On Behalf Of Steve Kinder I would like to interface to a Prosilica GE1350 CCD camera
and I believe this should be ok from the areaDetector package. Please
could anyone confirm successful use of this combination or my belief. Thanks Steve |