1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 <2009> 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: asyn R4.10, R4.11, R4.12 |
From: | Dirk Zimoch <[email protected]> |
To: | "Szalata, Zenon M." <[email protected]> |
Cc: | [email protected] |
Date: | Mon, 07 Dec 2009 12:00:40 +0100 |
Hi Zen,Asyn only supports limited EOS lengths, one or two chars depending on the low-level driver. However, StreamDevice supports any length. It works around the limited EOS length of asyn.
Dirk Szalata, Zenon M. wrote:
I have a simple soft IOC which uses asyn and streamdevice. It does IO with KS3988 GPIB CAMAC crate controller. The IOC works correctly with asyn R4.9. I have installed asyn R4.12 and my IOC does not work with asyn R4.12. I get the following message: "EOS TOO LONG". I also tried asyn R4.11 and R4.10 I see the same message with these the two versions of asyn as I see with the latest. How do I overcome this difficulty? Do these newer versions of asyn require that I make some change to my IOC? Can someone help me with this, please? For now I am forced to stay with asyn R4.9. Thanks, Zen
-- Dr. Dirk Zimoch Paul Scherrer Institut, WBGB/006 5232 Villigen PSI, Switzerland Phone +41 56 310 5182