streamDevice hex format input

[Gorka Ronda <g.ronda@jema.es>]

Hi all,

 

I’m using streamDevice, attempting to communicate with a device sending and receiving in hex format. I achieve to make right the sending, but I have problems with the receiving. I write the following in the protocol file:

 

##################################################################

cmd1 = \xC0\x01\xFE\x00\x00\x00\x00\x00\x00%<xor>;

c1 {

    out "\$cmd1";

#    in "\xA0\x55\xAA\x5F";

#    in 0xA0 0x55 0xAA 0x5F

#    in "%s";

    in "%*4r";

}

###################################################################

 

 

Like you could see I try different options for input, but any of those and others I try work for me. I like to have an input in hex like, 0xA0 0x55 0xAA 0x5F or A0 55 AA 5F in my soft IOC. Instead, I have the following, which could be ASCII:

 

##############################################################

epics> 2010/09/13 15:20:08.440 /dev/ttyS0 read 1

\240

2010/09/13 15:20:08.442 /dev/ttyS0 read 3

U\252_

###############################################################

 

 

What I have to write exactly for the input?

 

This is the record I use for that command. What type of record should I use?

 

##########################################################

record(bi, "$(P)$(R)C1")

{

    field(DESC, "Comando 1")

    field(DTYP, "stream")

    field(INP,  "@devwbc6600.proto c1 $(PORT) $(A)")

}

##############################################################

 

 

This is the st.cmd file:

 

###############################################################################

cd ${TOP}

## Register all support components

dbLoadDatabase "dbd/wbc6600test.dbd"

wbc6600test_registerRecordDeviceDriver pdbbase

 

###############################################################################

# Set up ASYN ports

# drvAsynSerialPortConfigure port ipInfo priority noAutoconnect noProcessEos

drvAsynSerialPortConfigure("L0","$(TTY)",0,0,0)

asynSetOption("L0", -1, "baud", "115200")

asynSetOption("L0", -1, "bits", "8")

asynSetOption("L0", -1, "parity", "none")

asynSetOption("L0", -1, "stop", "1")

asynSetOption("L0", -1, "clocal", "Y")

asynSetOption("L0", -1, "crtscts", "N")

asynOctetSetInputEos("L0", -1, "\n")

asynOctetSetOutputEos("L0", -1, "\n")

asynSetTraceIOMask("L0",-1,0x2) #0x7 para todos los mensajes

asynSetTraceMask("L0",-1,0x9) #0x1f para todos los mensajes

 

###############################################################################

## Load record instances

dbLoadRecords("db/devwbc6600.db","P=$(P),R=$(R),PORT=L0,A=0")

dbLoadRecords("db/asynRecord.db","P=$(P)$(R),R=asyn,PORT=L0,ADDR=-1,OMAX=0,IMAX=0")

###############################################################################

## Start EPICS

cd ${TOP}/iocBoot/${IOC}

iocInit

######################################################################

 

 

Thanks in advance,

 

Gorka