1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | TFTP I/O Error |
From: | "Jim Eastman" <[email protected]> |
To: | <[email protected]> |
Date: | Fri, 18 Feb 2011 16:57:40 -0800 |
Hello all, I'm trying to get an EPICS test app going on RTEMS on an
MVME5500 board, and I'm encountering a problem when trying to get files from a
TFTP server. "Can't open /TFTP/10.80.60.112/epics/mvme5500/st.cmd:
I/O error" My TFTP server logs don't show any attempt at this
connection. I'm using RTEMS 4.10 and EPICS 3.14.12. I am building the
apps with the -DOMIT_NFS_SUPPORT flag set in a MINGW environment on a Windows 7
machine with RTEMS-mvme5500 set as the target arch. I am also able to download that file (and others) from the
tftp server while still in the MOTLOAD prompt on the mvme board. I have the following GEVs set on the mvme board: mot-/dev/enet1-cipa=10.80.60.142 mot-/dev/enet1-sipa=10.80.60.112 mot-/dev/enet1-snma=255.255.0.0 mot-/dev/enet1-gipa=10.80.60.20 rtems-client-name=mvme5500 epics-script=epics/mvme5500/st.cmd rtems-dns-server=10.80.60.12 rtems-dns-domainname=pro-dex.com epics-ntpserver=71.245.107.83 The networking when the application loads seems to be
working fine, as I'm able to get time from the NTP server. I'm not running a BOOTP server, and so I hardcoded these
network parameters into bsp_driver_config and rtems_bsdnet_config in
rtems_netconfig.c Any assistance in this problem would be greatly appreciated.
Thank you very much. Regards, Jim Eastman |