1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Setting inter-character delay in Asyn |
From: | Andrew Johnson <[email protected]> |
To: | Eric Norum <[email protected]> |
Cc: | Prachi Chitnis <[email protected]>, EPICS Talk <[email protected]> |
Date: | Mon, 7 Mar 2011 13:13:24 -0600 |
On Sunday 06 March 2011 23:39:38 Eric Norum wrote: > At the APS I wrote a 'dribble' interpose layer that applied a delay > between each transmitted character. Do Andrew Johnson or Steve Shoaf have > this lying around somewhere? If so, perhaps it could be added to the 'Soft > Support' module page. Eric's asynDribble module is now available from the APS Modules Download page at http://www.aps.anl.gov/epics/download/modules/asynDribble-1.2.tar.gz and is listed on the Soft Support page. - Andrew -- An error is only a mistake if you don't learn from it. When you learn something from it, it becomes a lesson.