1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: GPIB DCL |
From: | Robert Emery <[email protected]> |
To: | Eric Norum <[email protected]> |
Cc: | [email protected] |
Date: | Mon, 28 Mar 2011 13:42:23 -0700 |
Hi Mark, Eric,I had a problem with my test setup Friday night when I went to test the device clear commands via asyn. I tried again this morning and both the device clear and selected device clear via the asyn record (.UCMD and .ACMD) worked fine and solved my problem with the Kikusui power supply not responding.
Thank you for your help. Rob Emery UW Medical Center On 3/26/11 4:57 PM, Eric Norum wrote:
On Mar 26, 2011, at 4:28 PM, Mark Rivers wrote:Hi Robert, I don't know much about VXI-11. Does the E5810 handle Universal Device Clear or Selected Device Clear in the same way as a local GPIB controller?Yes, it should perform both addressed and unaddressed Device Clear operations. Do you have a GPIB bus analyzer to see what's happening?