1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | MAXv question |
From: | Dirk Zimoch <[email protected]> |
To: | EPICS <[email protected]> |
Date: | Fri, 01 Apr 2011 14:36:52 +0200 |
Hi all,Is anyone using the @DPM_ON@ feature of the MAXv motor driver? I would like to modify it.
At the moment this feature allows to use the general purpose bits 0...7 as inputs to monitor the motor power. At the SLS our motor amplifiers support this feature. Thus it might be that it had originally been added by us (David Maden) for the OMS VME58 but I am not sure.
Now for the MAXv I would rather use bits 8...15 because bits 6 and 7 are not available on the backplane, only on the front connector, and we use a backplane transition module to connect our motors.
And I would like to integrate that change into the main software branch. So before breaking anything: Does anyone see a problem with that?
Dirk