1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: problem with ip330-2-6 (A/D converter board) scanmode functionality to switch modes at runtime |
From: | <[email protected]> |
To: | <[email protected]> |
Date: | Mon, 4 Jul 2011 08:48:00 +0000 |
When I was using the ip330 in Continuous mode I found it necessary to set the gain a couple of times in my startup file in order to get it to run: record(longout,"BL18I-EA-IONC-01:IGain") { field(PINI,"YES") field(VAL,"0") field(DTYP,"asynInt32") field(OUT,"@asyn(ip330b 0)GAIN") } And in the startup file: dbpf ("BL18I-EA-IONC-01:IGain","1") dbpf ("BL18I-EA-IONC-01:IGain","0") Note sure if this is relevant to you but it may be worth trying when you switch back to continuous mode. Pete Leicester Diamond Light Source From: [email protected] [mailto:[email protected]]
On Behalf Of Jay Steele Hi EPICS folks, I’m seeing a problem with the EPICS module for the VME ADC board IP330, software version 2-6. I’m trying to switch between Burst Continuous and Burst Single modes for step scanning and hardware-synchronized fly scanning,
respectively, at run time. When I process the provided ScanMode record, the board gets stuck in Burst Single mode no matter if I’m setting the Burst Continuous mode (value 3) or Burst Single mode (value 4).
Has anybody else been successful at switching modes at run time for the IP330 board using this software? Thanks, Jay Steele Xradia Corporation The information in this email, including any attachments, is confidential and intended only for the recipient(s) listed. Any use of this email for any
other purpose is prohibited. If you have received this email in error, please notify me immediately by reply email, delete this email, and do not disclose its contents to anyone.
-- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. |