1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | EDM start window position, from command line |
From: | Kathryn Spiers <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Thu, 11 Aug 2011 16:17:50 +1000 |
Hello, Further to the discussion in http://www.aps.anl.gov/epics/tech-talk/2011/msg00585.php, I have been trying to open edm windows at specified locations from the command line. I can’t get that to work, but before that, can’t seem to get the edm display file server and related operations to work. Firstly, edm –server or edm –server –display $DISPLAY both open an instance of edm. Subsequently: edm –x –open file.edl returns the error “No server found for display - abort” This error is returned even if the –display option is included before –open The command edm –x file.edl will open another instance of edm, and file.edl as expected. (adding ?X?Y values here doesn’t work) Without the –open option working, the –open file.edl?X?Y isn’t going to work... I’ve tried edm versions 1.10.1w, 1.12.39 and 1.12.56. Many thanks, Kathryn Spiers Controls Engineer Australian Synchrotron This message and any attachments may contain proprietary or confidential information. If you are not the intended recipient or you received the message in error, you must not use, copy or distribute the message. Please notify the sender immediately and destroy the original message. Thank you. |