EPICS RE: event record priority

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	RE: event record priority
From:	"Kalantari Babak" <[email protected]>
To:	"John Dobbins" <[email protected]>, "EPICS Tech-Talk" <[email protected]>
Date:	Thu, 13 Oct 2011 15:05:20 +0200

Hi John,

Yes, there is. Just set the "PRIO" field to HIGH to get your event record processed in cbHigh. By default (if you do not set PRIO) it is set to LOW. 

Babak


-----Original Message-----
From: [email protected] on behalf of John Dobbins
Sent: Thu 10/13/2011 2:37 PM
To: EPICS Tech-Talk
Subject: event record priority
 
All,

I am using an Event record to trigger processing of a number of other records. If I set .TPRO on the Event record or one of the triggered records I see that these records are on scan task cbLow. Is there a simple way to change the priority associated with an Event record?

Regards,

John Dobbins

Cornell Laboratory for Accelerator-based Sciences and Education
Cornell University
Ithaca, NY

References:: event record priority John Dobbins

Navigate by Date:: Prev: event record priority John Dobbins; Next: Re: Sequence monitor not getting callback J. Lewis Muir; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: event record priority John Dobbins; Next: EPICS driver for acqiris cPCI digitizer is available on epics.sf.net Hu, Yong; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024