1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: [help] degree in Computer Science/Software Engineering |
From: | Pavel Masloff <[email protected]> |
To: | Dirk Zimoch <[email protected]>, [email protected] |
Date: | Wed, 30 Nov 2011 09:56:38 +0300 |
Hi Pavel,
In my experience it is more important to understand the application, i.e. the machine and physics, than to have a degree in any field of computer science. I have a degree in physics and am more or less autodidact in programing. I came in contact with control systems and real time computing when I started my diploma thesis on accelerator physics. I was lucky that we had an electron synchrotron at our university at Dortmund, Germany. I worked on the control system during my diploma and PhD work.
When developing control system applications, I found it extremely useful to have an understanding of the machine and underlying physics. Another key to successfully develop control system applications is to work in a control room or a working machine for several months and be user of the control system. Then you learn best what machine operators really need.
Best wishes,
Dirk
Pavel Masloff wrote:
Dear colleagues!I would love to get a Master's degree in the field specifically related to what YOU guys do: EPICS, DAQ, creating interfaces for scientific installations, writing drivers for hardware, linking it to software, you name it. I have gotten a Bachelor's and a Master's degrees in /Robotics /and /Automation and Control /respectively. But, truth be told, the knowledge that I got (general, I'd say, mediocre) doesn't have a lot to do with all the work YOU do and which is yet to be done by me (as I have decided) in my career as Control/Software Engineer.
A rather off-topic question to you. I would appreciate to hear your answers, comments, advice.
* what did you study (or studying) in college and where?
Why would I need this? I am employed by the Efremov institute, and our laboratory develops coil-power supply systems for the ITER project (http://www.iter.org). I am responsible for the control part. Here at the Institute I have all the opportunities to gain knowledge related to electrical processes, apparatus, we have got decent pulsed-power facilities, great engineers and just nice people. However, the software/control area is undeveloped and we lack software specialists who I can learn from. Imagine, we are doing an international project, the level of the hardware, say, is decent. OK. But in terms of software, I must confess, we are not on the world level, which grieves me, to be honest. Of course, I would like our institute to competently fulfill Russia’s commitments towards ITER.
For this reason, I want to get a higher-education with focus on software design, possibly science-oriented. Let me say a few words about our contribution to ITER so as it will be clear enough for you to understand what I need. As I mentioned, our laboratory's scope of work includes creating coil-power supply systems. One of the key function is to protect the TF, PF, CS, CC coils by fast discharge of stored energy in case of a quench or other type of fault event. Briefly, the information from the sensors is processed by the Siemens S7 controllers, the time sequence for the actuators (bypass switch, vaccuum circuit-breaker, counter-pulse capacitor banks, pyrobreaker) is realized by Siemens FM352 Fast Boolean processor. Our plant system has to interact with the so-called CODAC control system, which is based upon EPICS and CSS. Additionally, we have to provide fast data for plasma stabilization.
With this in mind, as a developer, generally, I am not supposed to know all the 'command line cuisine' - there is the CSS framework, go program your PLCs and connect them to CODAC in compliance with a readme. I had done it already and I want to go beyond that.
I know there are lots of you on the list who are actually in charge of CODAC, there are many guys from the US national research laboratories. My message is addressed to you in the first place. I would love it if you would tell me:
* which courses/classes do you find had helped you in your current work?
* do you know any programs that provide sort of internships at
national laboratories? (would be great if they were related to ITER)
What are your thoughts about getting the required knowledge at university (the other option would be working at a lab without getting a degree)? In case of the latter where can one get such experience?
Thank you and I look forward to hearing from you!
--
Sincerely,
Pavel Maslov, MS
Junior Control Engineer / Power Pulsed Lab.
Efremov Institute for Electro-Physical Apparatus
St. Petersburg, Russia