| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Agilent U1082A epics support |
| From: | "Hu, Yong" <[email protected]> |
| To: | "'[email protected]'" <[email protected]>, "[email protected]" <[email protected]> |
| Date: | Thu, 19 Jan 2012 18:05:40 +0000 |
|
Hi Pete, There is EPICS driver support for Agilent
Acqiris high-speed digitizers and I have been using it for a variety of cPCI digitizers such as U1065A with DC 222 (2GHz, 8GS/s, 1-ch, 10-bit), U1063A with DC265 (150MHz, 500MS/s, 4-ch, 8-bit), etc. Since Agilent provides one universal
driver/library support for all Acqiris products (digitizer,
averager, etc.), I guess the EPICS driver should work for your
averager AP240. Check it out at
http://sourceforge.net/apps/trac/epics/wiki/acqiris
and get the codes using
hg clone http://epics.hg.sourceforge.net:8000/hgroot/epics/acqiris
Give it try and let me know your result.
Good luck! Yong
From:
[email protected] [mailto:[email protected]] On Behalf Of
[email protected] Unlikely I suspect but does anyone have epics support for the following? Agilent U1082A-001 with AP240 (1 GHz, 1-2 GS/s, dual channel).
Pete Leicester Diamond Light Source |