The synApps "ip" module has a StreamDevice database and protocol file for the Lakeshore 336. As Eric said it should work with either GPIB or Ethernet.
This is not listed in the EPICS Hardware Modules Web page, but it should be.
Mark
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Elliott Wolin
Sent: Thursday, February 09, 2012 3:29 PM
To: [email protected]
Subject: Fwd: Re: Driver for Lake Shore Model 336 temperature controller
Hi,
Unfortunately the manual says there is no serial interface, just USB,
IEEE-488, and Ethernet. We're interested in using Ethernet.
Thanks,
On 02/09/2012 04:24 PM, Maren Purves wrote:
Hi Elliott,
if it's anything like the LS 330 or LS 331 all you really needs is
a serial line interface/driver and a database that talks to it.
Maren
Elliott Wolin wrote:
Hi,
Anyone know where to get a driver for a Lake Shore Model 336
temperature controller? I'm particularly interested in a Linux
driver, not VxWorks.
Thanks,