1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: QT-based tools: Expressions of interest requested |
From: | <[email protected]> |
To: | <[email protected]> |
Date: | Thu, 23 Feb 2012 16:01:43 +0000 |
As Ian Gillingham mentioned in his post, at Diamond we current use EDM panels for our operator interfaces to accelerator and beamline systems. However we are looking to replace EDM/motif and are likely to be evaluating the choice of replacement technology in the near future. Currently I am the engineer scheduled to perform the evaluation and likely also to do the work. No decision has been taken yet on the choice, but one of the candidates is CSS/BOY. Another suggestion would be a QT-based solution, with a number of engineers already having solutions in parallel with the current EDM panels.
A key factor in the choice of technology will be finding other institutions to collaborate with in its development, support and maintenance. QT seems to be a popular technology within the EPICS community but users have tended to each create
their own solutions. QT is popular with engineers at Diamond as well, but the current lack of a coordinated development would count against it as the replacement for EDM. An EPICS QT collaboration would be very interesting as it would make QT a much more viable
candidate. A second key factor will be a migration path from the existing EDM technology to its replacement. Ideally we would need a utility to convert existing edl files to their replacements. It's very interesting to hear from Jane that TRIUMF has
similar considerations. In short, we are very interested in the possibility of an EPICS QT collaboration, although we don't know what technology we will go with for the panel replacements and this choice would obviously affect whether or not we would be able to
contribute to such a project. On the other hand the existence of a collaboration may affect the choice we make. Regards, Dave. Dr David Hickin Software Systems Engineer Diamond Light Source Ltd Diamond House Harwell Science & Innovation Campus Didcot, Oxfordshire, OX11 0DE -- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee
or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of
software viruses which may be transmitted in or with the message. Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
-- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. |