Experimental Physics and Industrial Control System
Dirk Zimoch wrote:
> I don't see where you set the baud rate. Use something like
> asynSetOption ("MOXA1", 0, "baud", "9600")
Well, this won't work. It works only if the Moxa maps its serial lines
to local /dev/ttyXXX devices on your PC and you use it like a local
serial line.
With the TCP connection, you may need a different way to set the baud
rate. I don't know how. See the Moxa manual.
Dirk
- Replies:
- Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Eric Norum
- References:
- "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" 洪春霞
- Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Dirk Zimoch
- Navigate by Date:
- Prev:
Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Dirk Zimoch
- Next:
Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Dirk Zimoch
- Next:
Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024