EPICS Immediately reprocess a record [SEC=UNCLASSIFIED]

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Immediately reprocess a record [SEC=UNCLASSIFIED]
From:	"LYNCH, Damien" <[email protected]>
To:	"[email protected]" <[email protected]>
Date:	Tue, 16 Oct 2012 22:19:13 +0000

Hi,

I have a record (running in a 3.14.12.2 IOC) that I would like to process as quickly as it can. This record is retrieving a waveform over a LAN from a DSO and takes a variable amount of time to process (mostly 15 - 35 ms but periodically around 150 ms).

Currently I am using a sequence program that does a pvPut(wfRecProcField, SYNC) in a hard loop to achieve this. Is this the best method? Could I have done this using the database only?

Thanks,
Damien

Replies:: Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Andrew Johnson; Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Tim Mooney

Navigate by Date:: Prev: Re: gpu integration into epics Rodrigo Castro; Next: Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: Calcout using CA output link sometimes gets INVALID severity Andrew Johnson; Next: Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024