1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: EPICS support for NewFocus 8752 controller? |
From: | Mark Rivers <[email protected]> |
To: | "'Fairley, Diane M.'" <[email protected]>, "[email protected]" <[email protected]> |
Date: | Fri, 30 Nov 2012 19:27:06 +0000 |
It’s a model 1 driver, i.e. not using asyn for the motor record device support.
From: [email protected] [mailto:[email protected]]
On Behalf Of Fairley, Diane M. Hi, We have a new motion control applications where our initial goal is using just the three-axis, open-loop driver in the Newport/New Focus iPico Ethernet-based pico-motor controller. These allow dumb remote control of motorized optics
positioning. The 8752 controller is part of the 8763-KIT listed here:
http://www.newport.com/Intelligent-Picomotor-iPico-Modules/918547/1033/info.aspx I notice that the motor package has support for this NewFocus 8752 controller. Does anyone have experience with this? Is this a model 2 or model 3 asyn driver? Are there any new updates to the driver?
Cheers, Diane |