1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: EPICS driver for E-517 |
From: | Tonia Batten <[email protected]> |
To: | "Rau, Steffen" <[email protected]> |
Cc: | "[email protected]" <[email protected]> |
Date: | Wed, 5 Dec 2012 08:35:22 -0600 |
Hi Steffen, Thank you so much for the information. It ends up the problem was associated with the pseudo motor PV’s I am using to control the motion of all three axis’s of the nanocube. That being said, I really appreciate the feedback. Regards, Tonia Batten From: Rau, Steffen [mailto:[email protected]] Hello Tonia, I’m working at PI, the manufacturer of the PI E-517. We have developed a driver for EPICS that supports our controllers. Maybe this does not show the problem you have, or you can look at the source code, how we implemented it. The sources can be found on sourceforge: http://sourceforge.net/projects/piasyn/ (I had some trouble with the mercurial repository and our firewall. Please download the tgz archive.) The driver will probably be part of the next motor release. Best regards Steffen Rau |