1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Problem with mca R7.2 and Rontec XFlash |
From: | Phillip Sorensen <[email protected]> |
To: | TechTalk EPICS <[email protected]> |
Date: | Wed, 06 Feb 2013 12:00:07 -0500 |
Hello,We are tring to setup the Rontec XFlash MCA with epics using the R7.2 version of mca.
The problem we are having is there seems to be a delay of some number of seconds after sending a command until we see an update in the MEDM screen. For example clicking the start and stop buttons for the acquisition show this. I we look at the XFlash unit it seems to update the front panel immediately, but the MEDM screen shows a delay. The spectrum update (which is set to 1 second) also seems to take 5 to 10 seconds per update.
We are not getting any timeout errors. Any suggestions? Thanks, Phil Sorensen CHESS