Experimental Physics and Industrial Control System
Can you explain the interface to the power supply? It is serial, TCP, etc.
How have you configured the asyn port?
Can you send your startup script?
Mark
________________________________
From: [email protected] [[email protected]] on behalf of James F Ross [[email protected]]
Sent: Monday, April 22, 2013 9:45 AM
To: EPICS Tech Talk
Subject: genesys power supply IOC
Hello all,
I'm trying to set up an IOC for a genesys power supply. It compiles, but when I try to run st.cmd I get the following errors (showing up in red after iocInit):
2013/04/22 09:37:58.974089 _main_ Businterface '07G-ECD-BL08' not found for '07G-ECD-BL08:Curr'
2013/04/22 09:37:58.974603 _main_ 07G-ECD-BL08:Curr: Can't attach to bus 07G-ECD-BL08 -1
2013/04/22 09:37:58.974715 _main_ 07G-ECD-BL08:Curr: Record initialization failed
Segmentation fault
I'm using asyn version 4.21, StreamDevice version 2.6, epics 3.14.12.1, and sequencer 2.0.12.
From what I've been able to find, this seems to be a problem between StreamDevice and asyn. I originally had aysn 4.13 before getting 4.21 and trying that. Neither solved the issue though. Anyone have any experience with this kind of issue?
Thanks!
James
- Replies:
- Re: genesys power supply IOC James F Ross
- References:
- genesys power supply IOC James F Ross
- Navigate by Date:
- Prev:
Re: FW: Gige performance increasing. Andrew Johnson
- Next:
RE: Gige performance increasing. Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
genesys power supply IOC James F Ross
- Next:
Re: genesys power supply IOC James F Ross
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024