EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019 
<== Date ==> <== Thread ==>

Subject: RE: asyn traceMask
From: Mark Rivers <rivers@cars.uchicago.edu>
To: "'Brian McAllister'" <mcallister@mit.edu>, "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Tue, 30 Jul 2013 20:38:52 +0000
The asyn iocsh commands only include asynSetXXX, and not asynGetXXX.  

As you suggested you could load an asynRecord on that port/addr and then use:

dbgf "myRecord.TMSK"

Mark


-----Original Message-----
From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Brian McAllister
Sent: Tuesday, July 30, 2013 3:16 PM
To: tech-talk@aps.anl.gov
Subject: asyn traceMask


How do I show what the asyn traceMask is set to using the IOC shell ?

Do I have to use an asynRecord ?

- brian


Replies:
Re: asyn traceMask Brian McAllister
References:
asyn traceMask Brian McAllister

Navigate by Date:
Prev: asyn traceMask Brian McAllister
Next: vxWorks (tNetTask): arpresolve: lookup failed (resource shortage or network configuration error -- check netmask) Brad Cumbia
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019 
Navigate by Thread:
Prev: asyn traceMask Brian McAllister
Next: Re: asyn traceMask Brian McAllister
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019