1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: EPICS-R3.14.12 installation on Ubuntu-12.04-LTS x86 PC |
From: | Ralph Lange <[email protected]> |
To: | Keith Parker <[email protected]> |
Cc: | [email protected] |
Date: | Mon, 16 Sep 2013 15:45:35 +0200 |
On 16.09.2013 15:21, Keith Parker
wrote:
Hello, This is my first post. I would appreciate any guidance in locating/writing a procedure/script to install EPICS-R3.14.12 specifically on an x86 PC with a freshly installed Ubuntu-12.04-LTS operating system. The documentation I have located so far is very good but very general and assumes the reader is an experienced professional, working in a national laboratory. I would like to locate/write (with some guidance) a procedure/script to install EPICS-R3.14.12 specifically on an x86 PC with a freshly installed Ubuntu-12.04-LTS operating system; targeted at students, from post-graduate to elementary levels. What would our lives have been like if we had access to such a thing when we were 10 years old? I am interested in the application of EPICS-R3.14.12 as a backbone of the Built Environment. Thanks, Keith Parker Hi Keith, you might start with the Debian packaged version of EPICS base [1]. These packages should install on Ubuntu, and are by far the easiest and most streamline way to get EPICS running. Cheers, ~Ralph [1] http://epics.nsls2.bnl.gov/debian/ |