Hi,
I would like to use mV in my EPICS folder and send V to my driver.
I have done conversion correctly using asynInt32 type but it doesn't work with asynFloat64.
Do you have any suggestion?
record(ao, "$(S):$(D)_$(C):CavVoltSet")
{
field(DTYP, "asynFloat64")
field(OUT, "@asyn($(PORT),$(ADDR),$(TIMEOUT))cavvolt")
field(PINI, "YES")
field(LINR,"SLOPE")
field(ESLO,"0.001")
field(PREC, "2")
}
I have try with
field(LINR,"SLOPE")
field(ASLO,"0.001")
and also with
field(LINR,"LINEAR")
field(EGUF,"1000")
field(EGUL,"0")
But nothing seems to change when I receive my value in my asynPortDriver.
Regards,