| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Some CSS BOY questions |
| From: | "John Gordon" <[email protected]> |
| To: | <[email protected]> |
| Date: | Mon, 17 Feb 2014 23:35:28 -0000 |
Hi We are thinking of using CSS and BOY to develop product test screens for our products. We have already developed some demo end-user screens with BOY, which work nicely, and were quick to do and get working. However these just set and read PVs that are handled by Channel Access Server at the typical refresh rates, which are fine for a GUI. I want to know how easy it is to do some of the critical tasks for the product testing application. These include: - Recover blocks of contiguous data that have been collected at high rate and buffered in the device - Do calculations based on those data blocks (eg noise analysis, peak fitting, zero subtraction etc etc) - Post the raw data and the computed results to file - Compare computed results with acceptance criteria read from files to get pass/fail - Put computed results, pass/fail indications and other text onto the GUI Regards John Gordon Pyramid Technical Consultants, Inc. |