Experimental Physics and Industrial Control System
Dear All,
I'm still a new user of EPICS, I wrote a simple IOC to get temperature values from the TCW122B-CM module.
The module is SNMP manageable so I used devSnmp from nscl labs as a support device for EPICS.
When I run the IOC, I get the message
"Did not find 'MacAddress' in module RFC1155-SMI"
and the IOC starts anyway. When I use the command caget on the temperature PV I get always 0.
caget TCW122B:Temp1
TCW122B:Temp1 0
With camonitor, I get
camonitor TCW122B:Temp1
TCW122B:Temp1 2014-02-25 14:36:17.094394 0 READ INVALID
If I use snnmpget, I get the real temperature value.
Any help to understand why I always get 0 from caget?
Thank you very much.
Nicoletta
--
..... @@ ........
....@(';')@.......
..0==/--\==0....
....../___\........
......_| |_.........
- Navigate by Date:
- Prev:
RE: Store long strings in EPICS record. Zelazny, Michael Stanley
- Next:
Re: Store long strings in EPICS record. Ralph Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Monitoring whether an IP device is connected or not Pearson, Matthew R.
- Next:
Re: Trouble with caget with denSnmp John A. Priller
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024