Dear All,
I'm still a new user of EPICS, I wrote a simple IOC to get
temperature values from the TCW122B-CM module.
The module is SNMP manageable so I used devSnmp from nscl labs
as a support device for EPICS.
When I run the IOC, I get the message
"Did not find 'MacAddress' in module RFC1155-SMI"
and the IOC starts anyway. When I use the command caget on the
temperature PV I get always 0.
caget TCW122B:Temp1
TCW122B:Temp1 0
With camonitor, I get
camonitor TCW122B:Temp1
TCW122B:Temp1 2014-02-25 14:36:17.094394 0 READ
INVALID
If I use snnmpget, I get the real temperature value.
Any help to understand why I always get 0 from caget?
Thank you very much.
Nicoletta
--
..... @@ ........
....@(';')@.......
..0==/--\==0....
....../___\........
......_| |_.........