Experimental Physics and Industrial Control System
Hi
Again, i could use some advice how to proceed:
I have a working lab setup consisting out of a sensor and a stepper
motor XY-table. Both are controlled via EPICS,
i use a sscan record for doing XY scans.
The sensor is connected via a remote pc (actually a RaspberryPi) running
an epics IOC.
I have a CSS GUI to control everything. Now i want to make scans, and
save the scan data (i.e. the sensor value for each X/Y-position) into a
local (ASCII) file ON THE GUI PC running CSS. Not on the PC running the
IOC client.
Any hint, how to implement this ?
From the docs, i understand that the natural way is to store the data
on the IOC-PC.
Thanks for any suggestion/comment
Christian Pauly
- Replies:
- Re: writing scan data to file via CSS Kasemir, Kay
- Navigate by Date:
- Prev:
Re: CSS: The difference among Javascript 、Python Script and Execute Command Kasemir, Kay
- Next:
Re: writing scan data to file via CSS Kasemir, Kay
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: areaDetector Windows 7 x64 Build Problems Zachary Brown
- Next:
Re: writing scan data to file via CSS Kasemir, Kay
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024