Re: Building Cexp & GeSys with RTEMS 4.10.2

[Till Straumann <strauman@slac.stanford.edu>]

Hi Philip.

Sorry it took so long to answer. I have uploaded up-to-date versions for
cexp and gesys:

http://www.slac.stanford.edu/~strauman/rtems/cexp/cexp-2.2.2.tgz
http://www.slac.stanford.edu/~strauman/rtems/gesys/gesys-20140818.tgz

Note that gesys is built using gnu configure - follow the instructions in
the (updated) INSTALL.
Please let me know if you have any problems.

Best
- Till

On 08/13/2014 07:10 AM, Philip Taylor wrote:
> I am trying to use RTEMS Cexp with RTEMS 4.10.2 running EPICS 3.14.12.4. I would
> prefer to use the latest Cexp version 2.2. I have built Cexp but am facing various
> build issues with the version of GeSys I have found.
>
> Firstly, where is the latest GeSys source?
> http://www.slac.stanford.edu/~strauman/rtems/software.html
> just has a snapshot dated 2011/09/27.
>
> The build issues when building GeSys include:
> 1. Tries to build target "rtemsbsp-install" for Cexp (no such target).
> 2. No rule to make GeSys target `o-optimize/libbspExt.nm', needed by `libnms'.
>
> My GeSys INSTALL file mentions Cexp version 1.6 as well as obsolete rtemsNfs, so
> there may well be build incompatibilities with the different subsystem versions.
>
> Has anyone built GeSys using recent versions of RTEMS and Cexp?
>
> BTW I am running RTEMS on a MVME6100 board (RTEMS "beatnik" BSP).
>
> Thanks,
>
>
> Philip Taylor
>
>
> ===============================================================================
>
> Philip Taylor                       email : pbt@observatorysciences.co.uk
> Observatory Sciences Ltd.           Web   : http://www.observatorysciences.co.uk
> Brighton Media Centre               Phone : (UK)+(0)1223-655603
> 21-22 Old Steine                    Mobile : 07913-720806
> BRIGHTON.
> BN1 1EL
> U.K.
>
> ===============================================================================