| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | quadEM R5-0 now available |
| From: | Mark Rivers <[email protected]> |
| To: | "[email protected]" <[email protected]>, "Beamline Controls and Data Acquisition" <[email protected]> |
| Date: | Fri, 17 Oct 2014 18:35:27 +0000 |
|
Folks, quadEM R5-0 is now available. This is from the release notes: ************************************ - Supported a new geometry where the current sources are arranged in a square array with 2 on the top and 2 on the bottom, in addition to the previous diamond geometry of top, bottom, left right. The sum, difference and position calculations
are done differently in this geometry. - Added a new Geometry PV that controls which geometry (Diamond, Square) is used in the calculations.
- Because the diodes that contribute to the sum, difference and position calculations depend on the geometry, the names of the Sum, Diff and Position PVs have changed.
Sum12, Sum34 have changed to SumX, SumY Diff12, Diff34 have changed to DiffX, DiffY Position12, Position34 have changed to PositionX, PositionY
Sum1234 has changed to SumAll ************************************ The home page is here: http://cars.uchicago.edu/software/epics/quadEM.html The documentation is here: http://cars.uchicago.edu/software/epics/quadEMDoc.html The release notes are here: http://cars.uchicago.edu/software/epics/quadEMReleaseNotes.html Let me know of any problems or suggestions. Mark |