| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 <2014> 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | galil softIOC lose the galil controller |
| From: | Mark Clift <[email protected]> |
| To: | "[email protected] ([email protected])" <[email protected]> |
| Date: | Thu, 30 Oct 2014 00:17:32 +0000 |
|
Hi Qingru,
I would guess that the multi-cast route is missing, which is required for the Galil driver you're using. We add the following line into /etc/rc.local route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0 The error simply says it could not poll the first 8 digital inputs with Galil TI (Tell input) command. Also there is a newer Galil driver designed to replace the one your using located here: http://motorapp.github.io/Galil-3-0/ Best wishes, Mark Dr. Mark Clift
Senior Controls Engineer
Australian Synchrotron
800 Blackburn Road
Clayton 3168
Ph: +613 8540 4264
Fax: +613 8540 4200
Mail:
[email protected]
|