Experimental Physics and Industrial Control System
Subject: |
CA Repeater: bind test err was "The operation completed successfully. " |
From: |
"J. Lewis Muir" <[email protected]> |
To: |
EPICS Tech-Talk <[email protected]> |
Date: |
Mon, 09 Feb 2015 16:12:35 -0600 |
Hello.
When I run caRepeater.exe from a command prompt in Windows 7 and then
run camonitor.exe in another command prompt for a PV (hosted on an IOC
on a different machine) of type DBF_LONG that is updating at about 10
Hz, the caRepeater.exe process prints the following message on the
console:
===
CA Repeater: bind test err was "The operation completed successfully. "
===
The camonitor.exe program seems to continue to run correctly.
Does anyone know how to fix this?
I looked briefly at src/ca/repeater.cpp where this error is printed,
and I changed the fprintf call to also print SOCKERRNO using the format
"%d", and it prints 0.
This is using win32-x86 EPICS Base 3.14.12.4 (with the Known Problems
patches applied) on Windows 7.
Thank you!
Lewis
- Replies:
- RE: CA Repeater: bind test err was "The operation completed successfully. " freddie.akeroyd
- Navigate by Date:
- Prev:
Re: using EPICS code with HTTP port Kasemir, Kay
- Next:
Re: epicsRingPointer.h error C2664: 'delete' : cannot convert parameter J. Lewis Muir
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: using EPICS code with HTTP port Jack
- Next:
RE: CA Repeater: bind test err was "The operation completed successfully. " freddie.akeroyd
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024