Re: error on the IOC shell for asyn driver

["Vishnu Patel" <vishnu.patel@rediffmail.com>]

Hi Mark,

   Thank you.

   One more question.

   I am EPICS driver developer. Is there any way in the asynDriver where i can set this in my driver so that even application developer forget to set asynSetTraceMask in the application st.cmd,  these error message can be stopped by driver?

Thank you

Vishnu 

From: Mark Rivers <rivers@cars.uchicago.edu>
Sent: Wed, 04 Mar 2015 01:56:01
To: 'Vishnu Patel' <vishnu.patel@rediffmail.com>, "techtalk " <tech-talk@aps.anl.gov>
Subject: Re: error on the IOC shell for asyn driver

Hi Vishnu,

 

Type the following command at the iocsh prompt, or include it in your startup script if you know the port will not be connected:

 

asynSetTraceMask <port name> 0 0

 

Mark

 

 

From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Vishnu Patel
Sent: Tuesday, March 03, 2015 2:17 PM
To: techtalk
Subject: error on the IOC shell for asyn driver

 

Hi,

    In my asyn based driver while the port is not connected all the scanning records are throwing an errors

 

<PV NAME> devAsynInt32 queueRequest port <port name> not connected

 

it is same for all asyn interfaces.

 

How i can stop error messages on the IOC shell while port is not connected?

 

 

Thank you

Vishnu

Get your own FREE website, FREE domain & FREE mobile app with Company email.

Know More >

 

Get your own FREE website, FREE domain & FREE mobile app with Company email.

Know More >