EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: areaDetector to control Pilatus
From: "GONG Yu" <[email protected]>
To: EPICS_tech_talk <[email protected]>
Date: Thu, 19 Mar 2015 17:04:19 +0800 (GMT+08:00) 
Hello everyone,
    I am planning to use areDetector to control the Pilatus Detector. For Pilatus, there are 2 computers, one computer is detector server which is directly connected to Pilatus detector, and another computer is called PPU connected to the detector server. The detector server has the program Camserver, which provides interface to EPICS. I have some questions:
    Is it possible to install the EPICS & areaDetector only in the PPU to connect to the Camserver in the detector server? If it is possible, what commands should I issue to connect the EPICS & areaDetector to Camserver? 
Thank you

GongYu
Replies:
RE: areaDetector to control Pilatus giles.knap
Navigate by Date:
Prev: Error while staring archive engine in eclipse Kalyani Thigale/TVM/TCS
Next: RE: areaDetector to control Pilatus giles.knap
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Error while staring archive engine in eclipse Kasemir, Kay
Next: RE: areaDetector to control Pilatus giles.knap
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024