1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: macro value |
From: | "Mooney, Tim M." <[email protected]> |
To: | l123173 <[email protected]>, "[email protected]" <[email protected]> |
Date: | Mon, 20 Apr 2015 17:30:55 +0000 |
You're doing it right. You should look at the dbLoadRecords command that loaded the scaler database to make sure you have the right macro values. If you do, you should do
caget xxx:scaler974.CNT and see if you can connect. If not, you should look at the ioc console output to see if the database loaded correctly. Tim Mooney ([email protected]) (630)252-5417
Software Services Group (www.aps.anl.gov) Advanced Photon Source, Argonne National Lab From: [email protected] [[email protected]] on behalf of l123173 [[email protected]]
Sent: Monday, April 20, 2015 10:17 AM To: [email protected] Subject: macro value Hi tech-talk,
computer : linux redhat6.0 3.14.12.1 synApp5.6 I startup the medm with "medm -x -macro "P=xxx:,S=scaler974" /home/bsrf-non/Documents/synApps_5_6/support/all_adl/scaler.adl", but it could connect. I think it is the macro value, because I copy it from others( I could not contact him )and it worked well before. Recently, I delete the synApp by careless, it did not work evenif I rebuilt the synApp. I know nothing about how to set the macro value , could you teach me how to know your macro value. Thanks for you advice! Thank you, Xing Li |