EPICS Re: conditional process two records

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
<== Date ==>		<== Thread ==>

Subject:	Re: conditional process two records
From:	Isabella Rey <[email protected]>
To:	Zhang Yuliang <[email protected]>
Cc:	tech-talk <[email protected]>
Date:	Wed, 22 Apr 2015 15:32:41 +0100

Hi Zhang,

One way would be to introduce a fanout record with LNK1 and LNK2 pointing at records A and B, and SELM set to "Specified".

Then you would have a fift calcout record that writes 1 or 2 to the SELN field of the FANOUT, depending on the bo record value.

Hope this helps,

Isabella

On 22 April 2015 at 14:04, Zhang Yuliang <[email protected]> wrote:

Hello all,

I want to know how to conditional process two records upon the third record's value. For examle: i have there records, one bo record and two calcout record(A and B), if the value of bo record is zero, process calcout record A, else process calcout record B.

Any ideas?
Thanks in advance!

Zhang Yuliang

References:: conditional process two records Zhang Yuliang

Navigate by Date:: Prev: Re: RE: conditional process two records Zhang Yuliang; Next: RE: Misunderstanding of epid record ODEL field? Mooney, Tim M.; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
Navigate by Thread:: Prev: Re: RE: conditional process two records Zhang Yuliang; Next: DBD/DB validator? Ralph Lange; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025