| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Regading Conflicting libraries for CA Lab & labCA |
| From: | Till Straumann <[email protected]> |
| To: | Mark Rivers <[email protected]>, Rahul Jain <[email protected]>, "[email protected]" <[email protected]> |
| Date: | Wed, 22 Apr 2015 08:19:43 -0700 |
I think what you ultimately want is to avoid is having
labCA and calab/labview (or other epics CA clients)
using different versions of the epics base libraries
(ca.dll, Com.dll).
-> make sure all your epics clients are built against
the same epics base version
-> have PATH point to the DLLs of this base version
this way you ensure all clients work correctly.
If you must use different versions of base for labCA
and calab then you must make sure the PATH points
to (and only to) the correct version when you use either
labCA or calab. Having multiple versions of ca.dll/Com.dll
in your PATH can potentially cause trouble.
HTH
- Till
On 04/22/2015 05:18 AM, Mark Rivers wrote:
How did the EPICS CA Lab installation find those DLLs from labCA? Is that directory in your PATH? If so, try removing it from the PATH. Where are you trying to install EPICS CA Lab? Mark ________________________________________ From: [email protected] [[email protected]] on behalf of Rahul Jain [[email protected]] Sent: Wednesday, April 22, 2015 7:10 AM To: [email protected] Subject: Regading Conflicting libraries for CA Lab & labCA Dear Sir, I want to install EPICS CA Lab (an EPICS channel access interface for LabVIEW™) on a win-x86 PC, on which labCA (an EPICS channel access interface for Scilab and Matlab) is already installed. I am getting following warning messages while installation:- To avoid incompatible library mixes installation has been stopped. Conflicting libraries: f:\bnm\EPICS_win32\labca_3_0_beta\bin\win-x86\caRepeater.exe f:\bnm\EPICS_win32\labca_3_0_beta\bin\win-x86\ca.dll f:\bnm\EPICS_win32\labca_3_0_beta\bin\win-x86\Com.dll Please move,remove or rename conflicting libraries. I want CA Lab (LabVIEW™) & labCA (Scilab and Matlab) both to be there on my PC. Please guide me in this regard. With best regards Rahul Jain RRCAT, Indore (INDIA)