1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: CA client broadcast brings down galil which is not running EPICS |
From: | Henrique Almeida <[email protected]> |
To: | Mark Clift <[email protected]> |
Cc: | Tom Caradoc-Davies <[email protected]>, "[email protected]" <[email protected]>, "[email protected] \([email protected]\)" <[email protected]> |
Date: | Tue, 26 May 2015 14:04:46 -0300 |
Dear All,
Firmware revision C is now available for the 40x0 controller, and the release notes include several ethernet fixes. It is worth trying this firmware C. All clues regarding cause are important (CA broadcast etc).
We could ask Galil to make the IK command block CA ports? If EPICS CA broadcasts are what is causing the Galil to become unresponsive on the network, enhancing the IK command would seem the way to go.
Have you tried a simple IK1 command on the controller? Please refer to command manual for IK command. This may help, but others have reported it didnt help at all. With an older RIO 47200 this fixed our problem with it dropping off the network.
A cause needs to be found, before we can describe a fix. Galil have known about this problem for some time, but are unable to reproduce it in their lab. Galil are keen to find a fix, but may need help as their test environment does not include EPICS.
JinHu, I'm most curious to hear your test results later in the week. I hope you can find the cause for us.
Best wishes,
Mark
Dr. Mark CliftSenior Controls EngineerAustralian Synchrotron800 Blackburn RoadClayton 3168Ph: +613 8540 4264Fax: +613 8540 4200Mail: [email protected]