1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Oerlikon leybold MAG.DRIVE iS |
From: | "Heesterman, Peter J" <[email protected]> |
To: | "'[email protected]'" <[email protected]>, "[email protected]" <[email protected]> |
Date: | Tue, 29 Sep 2015 15:39:39 +0000 |
Hi Pete, Yes, I do. This project is near complete, and has been commissioned here at JET. We have 6 off MAG.DRIVE Digital here. (I’m not quite sure whether your pump model is exactly the same?) I haven’t made a public release, to date, but will do so shortly. NB, see
http://www.aps.anl.gov/epics/tech-talk/2015/msg01319.php - ISIS have 2 off the (older) model TD20 Classic. My software supports both these types. Cheers, Peter. From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected] Does anyone have an epics support module for an Oerlikon Leybold MAG.DRIVE iS turbo pump (TURBOVAC MAG W600 iP)?
This is an RS232 (or 485) device so perhaps someone has already written a streamDevice module for it they could share? Thanks Pete Leicester Diamond Light Source -- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt
by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. |