Experimental Physics and Industrial Control System
Dear Rory
I do not have this type of RGA, but a quick check of the documentation claims it has a ‘documented ASCII command-line API’.
Sounds like one could use the serial communication Stream Class module (which is on top of ASYN) to talk to it over TCP/IP, if you can get that document from the vendor.
Keith
> On Jan 13, 2016, at 8:57 AM, <[email protected]> <[email protected]> wrote:
>
> Hello,
>
> I am trying to figure out how control a Microvision 2 RGA with EPICS. This unit has an Ethernet interface but no obvious API. I understand that Microvision 2 units have been connected to EPICS at Diamond directly through their Ethernet without using a PC running MKS’s Process Eye. Any help with this would be appreciated.
>
> Regards,
>
> Rory Clarke
>
> Rory Clarke
> Electrical and Controls Systems Group
> Daresbury Laboratory
> Keckwick Lane
> Warrington
> Cheshire
> WA4 4AD
>
> Email: [email protected]
------
Keith Thorne <[email protected]>
CDS Software Engineer
LIGO Livingston Laboratory
Livingston, LA 70754
Phone: (225)686-3168 Fax: (225)686-7189
- References:
- RGA MKS Microvision 2 rory.clarke
- Navigate by Date:
- Prev:
RGA MKS Microvision 2 rory.clarke
- Next:
RE: RGA MKS Microvision 2 david.hickin
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RGA MKS Microvision 2 rory.clarke
- Next:
RE: RGA MKS Microvision 2 david.hickin
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024