Experimental Physics and Industrial Control System
Hi,
I am trying to start an epics driver for Basler scA-1390-17gc camera.
I copied the github repository from
https://github.com/sesamecs/basler-gige.git
I installed pylon3 in /opt directory and started camera with Pylonveiwer.
But when I start epics driver from the above repository following error
messages are shown.
Exception: Failed to write enumeration value. Enum entry is not
writableUnable to initialize driver thread
Unable to read BOC03-DI-CAM1:getExposure: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getGain: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getHeight: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getSize: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getOffsetY: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getWidth: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getGainAuto: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getOffsetX: Driver thread is unable to read
Unable to read BOC03-DI-CAM1:getTriggerSource: Driver thread is unable to
read
apart from these I am also getting error
"../../../src/ioc/rsrv/online_notify.c: CA beacon (send to
"127.0.0.1:5065") error was "Connection refused"
Please duide me how to start this epics driver.
Thank you
- Replies:
- Re: Error in interfacing gigE camera make: Balser Mark Rivers
- Navigate by Date:
- Prev:
Re: CA connection problems between VxWorks and Windows Michael Davidsaver
- Next:
Re: Epics-Digitizer Communication Hulusi Öz
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: CA connection problems between VxWorks and Windows Michael Davidsaver
- Next:
Re: Error in interfacing gigE camera make: Balser Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024