1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: AreaDetector / ADURL queries |
From: | Bruno Martins <[email protected]> |
To: | "Heesterman, Peter J" <[email protected]> |
Cc: | "EPICS Tech-Talk \([email protected]\)" <[email protected]> |
Date: | Sat, 18 Mar 2017 12:21:14 -0400 |
Questions:1. In start_epics, I suspect that:medm -x -macro "P=13SIM1:, R=cam1:" simDetector.adl & is meant to be:medm -x -macro "P=13URL1:, R=cam1:" URLDriver.adl &
2. In st.cmd, in the line:{URLDriverConfig("$(PORT)", 0, 0)Is the brace character intended, or is a typo?I can make it work if the brace is removed.
3. In st.cmd, some lines refer to R=cam1:, whereas some lines refer to R=image1:, is this intended?e.g.dbLoadRecords("$(ADURL)/db/URLDriver.template","P=$(PREFIX), R=cam1:,PORT=$(PORT),ADDR=0, TIMEOUT=1") anddbLoadRecords("$(ADCORE)/db/NDStdArrays.template", "P=$(PREFIX),R=image1:,PORT=Im age1,ADDR=0,TIMEOUT=1,NDARRAY_ PORT=$(PORT),TYPE=Int8,FTVL= UCHAR,NELEMENTS=12582912") I can make it work if I change R=image1: to R=cam1:4. In auto_settings.req some lines refer to R=cam1:, and some refer to R=image1:, is this intended?Again, I can make it work if I change R=image1: to R=cam1:
5. The issue I haven’t been able to resolve is this (see screen shot):
I believe the software is correctly collecting image data frames, and the ImageJ plugin shows green with correct connection.But – I don’t see any picture...What could I be missing here?