1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Switched PDUs with EPICS support |
From: | Tomaž Šuštar <[email protected]> |
To: | Tom Slejko <[email protected]>, Ziga Oven <[email protected]> |
Cc: | tech-talk <[email protected]> |
Date: | Wed, 10 May 2017 15:27:42 +0200 |
Hi, These are also in use at PSI: https://www.gude.info/en/power-distribution/switched-pdu/expert-power-control-8210-8211.html They are rack mountable, and for power supply there is only an IEC 20 connector, so you can order a power cord of any length for it. Regards Tomaž On 10. 05. 2017 08:57, Tom Slejko
wrote:
Hi all, at PSI SwissFEL we use Gude PDUs throughout the facility: https://www.gude.info/en/power-distribution/switched-metered-pdu/expert-power-control-1202-series.html EPICS device support is up and running and based on top of SNMP device support. For more info contact Tomaz Sustar ([email protected]) as he was working on it. IIRC the sources are not released to the public at the moment, but we can probably pull some strings to release it if you decide to go this way... There were quite some problems with Gudes not properly renewing DHCP addresses (leading to duplicated IP addresses in the network!) but this was in large part resolved... Not sure about the cord length though, as this was never an issue for us... Regards, Tom ───────────────────────┐ ┌─┐ ┌─┐ ┌─┐ ┌─────────────────────── └─┘ └─┘ └─┘ └─┘ Tom SLEJKO, Group Leader / Senior Control system engineer Email: [email protected] http://www.cosylab.com Phone: +41 76 687 7673 Teslova ulica 30 Skype: tomslejko ──┐ ┌─┐ ┌─┐ ┌─┐ ┌───────────────────────────┐ ┌─┐ ┌─┐ ┌─┐ ┌── └─┘ └─┘ └─┘ └─┘ └─┘ └─┘ └─┘ └─┘ ----- Original Message ----- From: "Ziga Oven" <[email protected]> To: "tech-talk" <[email protected]> Sent: Wednesday, 10 May, 2017 02:02:58 Subject: Switched PDUs with EPICS support Hi All, We are looking for alternative to APC switched PDUs as we would like to have cord longer than standard APC length of 12 feet. http://www.apc.com/shop/us/en/products/Rack-PDU-Switched-1U-15A-100-120V-8-5-15/P-AP7900B I have checked the EPICS modules page and I have found several other options with existing support, but they all look a bit outdated (based on part numbers on the page and cross-referencing them with current vendor part numbers). Are there other switched PDUs with EPICS support in use besides APC? Thanks, Žiga -- Tomaž Šuštar Control Systems Engineer Radiology Protection Expert Cosylab Switzerland tel.: +41 56 310 2719 |