Experimental Physics and Industrial Control System

On 08/13/2017 03:28 PM, Hidas, Dean wrote:
> Greetings EPICS Experts,
> 
> I am trying to dump archive data for some setpoints but am only interested in values when they change.  Is there an easy way to only print out values only once they change?  I was trying something like the following:
> 
> arget -s '2016-8-1 00:00:00' -e '2017-8-1 00:00:00' -c 1000 PVNAME
> 
> but this gives:
> ...
> 2016-10-19 16:58:58.343624 220.0
> 2016-10-19 16:58:59.367182 220.0
> 2016-10-19 16:58:59.877238 220.0
> 2016-10-19 16:59:00.399215 220.0
> ...

At first glance this seems like a mis-configuration of the archiver, or
noise.  I certainly wouldn't want so much redundant data to be stored.
In either case, I'd suggest looking at the ADEL field of this record to
see if it should be increased.

Replies:

Re: Archive Dump on Change Only Maren Purves

References:

Archive Dump on Change Only Hidas, Dean

Navigate by Date:

Prev: Re: Building CSS from scratch for my own product Jörn Dreyer

Next: Re: Building CSS from scratch for my own product Kasemir, Kay

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Archive Dump on Change Only Laznovsky Michael (PSI)

Next: Re: Archive Dump on Change Only Maren Purves

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024