1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: mrfioc2 release 2.2.0 |
From: | Jeong Han Lee <[email protected]> |
To: | [email protected] |
Date: | Tue, 17 Oct 2017 18:28:24 +0200 |
* PCIe-EVR-300DC * MTCA-EVR-300 and MTCA-EVR-300UOf course, MD stayed at ESS during this summer with bad weather. Thank you, Michael! :)
The MTCA platform support is the major goal in that branch, and at the same time PCIe-EVR-300 should be ready.
ESS needs to deploy the simple timing system a lot around EU. In order to reduce cost, we would like to have the stand-alone EVR instead of an external EVG inputs. This branch also has the full (?) support on this new feature.
We are evaluating this branch with linux_x86_64 and linux_ppc64xxxx. Technically, both are linux, but one is based on intel, and the other is on powerpc.
Once we have some results, which we would like to share with EPICS community, I will let you know.
Best, Han On 10/09/2017 12:22 PM, Michael Davidsaver wrote:
Version 2.2.0 of the mrfioc2 driver for MRF timing cards is now available. This release adds support for newer 300 series PCI devices. Some incompatible changes have been made since the previous 2.1.0 release. The minimum required versions of Base and devlib2 have been updated. See the supported hardware list and change log for details. http://epics.sourceforge.net/mrfioc2/