1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: Seq-2.2.5 compilation on windows |
From: | Mark Rivers <[email protected]> |
To: | 'Ralph Lange' <[email protected]>, EPICS Tech Talk <[email protected]> |
Date: | Sun, 21 Jan 2018 17:07:44 +0000 |
I think it would be useful to add the link for the 0.13.5 prebuilt to the sequencer documentation. https://sourceforge.net/projects/re2c/files/old/ If there are sites with more recent prebuilts that would be even better. Mark From: [email protected] [mailto:[email protected]]
On Behalf Of Ralph Lange On the installation notes for the sequencer (http://www-csr.bessy.de/control/SoftDist/sequencer/Installation.html), Ben has noted that re2c 0.9.9 is the
minimum version required, so the documentation is fine. @Ben: is there an easy way to add a check to the SNL build that would give a more obvious indication? As always, thanks a lot for your help, Mark! ~Ralph On Sun, Jan 21, 2018 at 5:41 PM, Vishnu Patel <[email protected]> wrote:
|