Experimental Physics and Industrial Control System

Hi all,

this is a bit of a long shot, but I got to ask:

we have an Advantech ADAM 6050 that I'd like to talk to/read
out from EPICS, mostly read out, to monitor something, basically,
monitor bits. We're trying to use the same equipment that
the rest of the hardware it came with is using - but we'd
like to get the monitoring output into our existing EPICS
framework

We're still running 3.13.8 and for all I know we don't
have asyn, so I very much doubt that we have any asyn
experience in house. (The other PLCs we're using are
Allen Bradley).

Has anybody used one of these things, and if so, where do
I start, or should I rather start from the icedTea stack
dump I get when trying to access the thing from a web
browser?

Thanks,
Maren

Replies:

RE: Modbus Device Support for Advantech ADAM6050? Mark Rivers

Navigate by Date:

Prev: RE: Port scan with nmap causes infinite loop in casDGClient::processDG() [Re: CA gatway runs away when zero length PV name in UDP search request] Mark Engbretson

Next: asyn IP server port driver with streamDevice Rod Nussbaumer

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <2018>  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Job openings at ITER Ralph Lange

Next: RE: Modbus Device Support for Advantech ADAM6050? Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <2018>  2019  2020  2021  2022  2023  2024